Acrylic | Asahi | Standard | 80N | |
POM | Asahi | Copolymer
Medium Viscosity | 4520 | |
POM | Asahi | Copolymer
High Flow | 7520 | |
Nylon 66 | Asahi | General Purpose | 1300S | |
Nylon 66 | Asahi | 33%GF
Fatigue Resistance
| 1300G | |
Nylon 66 | Asahi | Flame Retardant
Halogen Free | FR 200 | |
Nylon 66 | Asahi | Flame Retardant
Halogen Free | FR 370 | |
POM | Asahi-Kaisei | Homo polymer
Medium Viscosity | 5010 | |
POM | Asahi-Kaisei | Homo polymer
High Viscosity
High Impact Resistance | 3010 | |
POM | Asahi-Kaisei | Homo polymer
High Viscosity
High Impact Resistance | 2010 | |
ABS | Chi Mei | Heat resistance, high impact strength | PA-777B | |
ABS | Chi Mei | Ultra-high heat resistance, moderate impact strength | PA-777D | |
ABS | Chi Mei | Ultra-high heat resistant, moderate impact strength | PA-777E | |
ABS | Chi Mei | Low VOC, heat resistance | PA-77NB | |
ABS | Chi Mei | Chemical resistance and high impact resistance | PA-797 | |
ABS | Chi Mei | Electroplating dedicated | PA-726M | |
ABS | Chi Mei | High impact strength, high rigidity, high gloss, electroplating dedicated | PA-727 | |
ABS | Chi Mei | Light-resistance, heat-resistance, high-impact, 1.5mm V-0, 2.5mm 5VA | PA-763 | |
ABS | Chi Mei | Light resistance, heat resistance, 1.5mm V-0, 1.5mm 5VB, 2.5mm 5VA | PA-764 | |
ABS | Chi Mei | Light resistance, heat resistance 2.5mm V-0, 2.5mm 5VB, 3.0mm 5VA | PA-764B | |
ABS | Chi Mei | Highly flame retardant, high heat resistance, 0.75mm V-2, 1.0mm V-0, 2.5mm 5VA | PA-764G | |
ABS | Chi Mei | High-flowability, 1.0mm V-1, 1.5mm V-0, 1.5mm 5VB, 2.5mm 5VA (TBBA series) | PA-765 | |
ABS | Chi Mei | High flowability, 1.5mm V-1, 2.1mm V-0, 2.1mm 5VB, 2.5mm 5VA (TBBA series) | PA-765A | |
ABS | Chi Mei | General flowability, 1.5mm V-2, 2.5mm V-0, 2.5mm 5VB, 3.0mm 5VA (TBBA series) | PA-765B | |
ABS | Chi Mei | High flowability | PA-737 | |
ABS | Chi Mei | High flowability, medium strength | PA-757H | |
ABS | Chi Mei | High flowability, high impact strength | PA-746 | |
ABS | Chi Mei | High flowability, high impact strength | PA-746H | |
ABS | Chi Mei | High flowability, easily molded into big parts, good painting effect | PA-746M | |
ABS | Chi Mei | High flowability, high rigidity, high gloss. Performance is comparable to PA-757 | PA-756 | |
ABS | Chi Mei | Ultra-high flowability | PA-756H | |
ABS | Chi Mei | Ultra-high flowability, moderate strength (same strength as 757) | PA-756S | |
ABS | Chi Mei | High gloss, ultra-high rigidity, especially good tensile strength | PA-707 | |
ABS | Chi Mei | High rigidity/high gloss/medium impact strength | PA-757 | |
ABS | Chi Mei | High impact strength | PA-717C | |
ABS | Chi Mei | Ultra-High Impact Strength | PA-747 | |
ABS | Chi Mei | Ultra high impact strength/good low temperature resistance | PA-709 | |
ABS | Chi Mei | High rigidity/medium impact strength/pre-color | PA-757 J01 | |
ABS | Chi Mei | High gloss black | PA-757G J08 | |
ABS | Chi Mei | High rigidity, medium impact strength, standard-white pre-colored | PA-757 A01 | |
ABS | Chi Mei | High strength for extrusion, injection, standard white pre-colored | PA-747S A01 | |
ABS | Chi Mei | Low monomer residue (EU 10/2011 Certification) | PA-757F | |
ABS | Chi Mei | High impact strength profile extrusion materials | PA-747R | |
ABS | Chi Mei | High rigidity profile extrusion materials | PA-747F | |
ABS | Chi Mei | Chemical resistance/vacuum forming/refrigerator plating materials | PA-747H | |
ABS | Chi Mei | High strength for extrusion/injection | PA-747S | |
ABS | Chi Mei | Ultra-high impact resistance | PA-709S | |
ABS | Chi Mei | Dedicated extruder pipes | PA-709P | |
ABS | Chi Mei | Antimicrobial Grade,ISO 22196 (JIS Z 2801) ,GB/T 31402-2015 | PA-757 AB | |
MABS | Chi Mei | Good transparency, high flowability | PA-758 | |
MABS | Chi Mei | Transparency with blue tint, high rigidity, chemical resistance | PA-758R | |
ASA | Chi Mei | PW-957 is a general grade ASA Resin. It has high flowability and high gloss characteristics,
and is widely used in outdoor and weather resistance products. | PW-957 | |
ASA | Chi Mei | Extrusion Grade ASA Resin can be used for extrusion sheet for outdoor application.
Especially good compatibility with PVC.
Its suitable to apply on co-extrusion with PVC as well.
It is widely used for building materials and automotive parts. | PW-997S | |
ASA | Chi Mei | Extrusion Grade ASA Resin with higher flow ability can be used for extrusion sheet for outdoor application.
Especially good compatibility with PVC.
Its suitable to apply on co-extrusion with PVC as well.
It is widely used for building materials and automotive parts. | PW-997 | |
ASA | Chi Mei | Heat resistance/high impact strength | PW-978B | |
AS | Chi Mei | High transparency, chemical resistance | PN-106L150 | |
AS | Chi Mei | High flowability, high transparency | PN-107L125 | |
AS | Chi Mei | High flowability | PN-117C | |
AS | Chi Mei | Natural light amber color | PN-117L100 | |
AS | Chi Mei | Transparent blue | PN-117L200 | |
AS | Chi Mei | Natural amber color, heat resistant grade | PN-127L100 | |
AS | Chi Mei | Transparent blue, heat resistant grade | PN-127L150 | |
AS | Chi Mei | Transparent dark blue, Heat Resistant Grade | PN-127L200 | |
AS | Chi Mei | Chemical resistance, high impact strength | PN-127H | |
AS | Chi Mei | High strength, high chemical resistance | PN-137H | |
AS | Chi Mei | Low monomer residue (EU 10/2011 Certification, GB4806), High flowability, high transparency | PN-107L125FG | |
AS | Chi Mei | Low monomer residue (EU 10/2011 Certification, GB4806), high strength, high chemical resistance | PN-117HL150FG | |
AS | Chi Mei | Low monomer residue (EU 10/2011 Certification, GB4806), Water clear | PN-127L150FG | |
PS | Chi Mei | For general injection/for injection blowing | PH-55Y | |
PS | Chi Mei | Heat-resistant, high impact strength | PH-88 | |
PS | Chi Mei | Heat and impact resistant, high gloss | PH-888G | |
PS | Chi Mei | Extrusion molding | PH-88S | |
PMMA | Chi Mei | Heat resistant injection grade, with high temperature resistance,
and heat distortion temperature up to 100°C, tough mechanical strength | CM-205 | |
PMMA | Chi Mei | General purpose injection grade, flowability and heat resistance | CM-207 | |
PMMA | Chi Mei | High flowability injection grade, easy mold processing | CM-211 | |
MS | Chi Mei | Transparency is close to that of Poly Methylmethacrylate (PMMA) | PM-600 | |
PC | Chi Mei | Medium viscosity | PC-110 | |
PC | Chi Mei | Low viscosity | PC-115 | |
PC | Chi Mei | High flow | PC-122 | |
PC | Chi Mei | High flow, good recyclability | PC-145K | |
PC | Chi Mei | Non-brominated and non-chlorinated flame/1.0 mm V0, Low smoke density | PC-616LS | |
PC | Chi Mei | Flame retardant (non-brominated, and non-chlorinated), 1.0mm V0 | PC-6600 | |
PC | Chi Mei | Flame retardant (non-brominated, and non-chlorinated), 1.5mm V0 | PC-6610 | |
PC | Chi Mei | Flame retardant (non-brominated, and non-chlorinated), 1.5mm V0 | PC-6620 | |
PC | Chi Mei | Transparent, Flame retardant (non-brominated, and non-chlorinated), 2.5 mm V0 | PC-6700 | |
PC | Chi Mei | Transparent, Flame retardant (non-brominated, and non-chlorinated), 3.0 mm V0 | PC-6710 | |
PC | Chi Mei | Transparent, Flame retardant (non-brominated, and non-chlorinated), 1.5 mm V0 | PC-6715VT | |
PC | Chi Mei | High Flowability | PC-175 | |
PC | Chi Mei | Medium viscosity, UV stabilized | PC-110U | |
PC | Chi Mei | Low viscosity, UV stabilized | PC-115U | |
PC | Chi Mei | High flow, UV stabilized | PC-122U | |
PC | Chi Mei | Comply with Bio-compatibility test(ISO10993-4,5,10,11). Gamma resistance(particular color) | PC-115P | |
PC | Chi Mei | Comply with AMECA(SAEJ576) and ECE-R112 | PC-110L | |
PC Alloy | Chi Mei | High flow/1.5mm HB | PC-345 | |
PC Alloy | Chi Mei | Balanced type, 1.5mm HB | PC-365 | |
PC Alloy | Chi Mei | High heat, high impact, 1.5mm HB | PC-385 | |
PC Alloy | Chi Mei | Ultra-High heat, halogen-free flame retardant, 1.2mm V-0, 2.5 mm 5VA | PC-545 | |
PC Alloy | Chi Mei | High flow, halogen-free flame retardant, 1.5mm V-0, 3.0mm 5VA | PC-510 | |
PC Alloy | Chi Mei | High heat, halogen-free flame retardant, 1.5mm V-0, 2.0 mm 5VB | PC-540 | |
PC Alloy | Chi Mei | High heat, halogen-free flame retardant, 1.5mm V-0, 2.0 mm 5VB | PC-540A | |
HBR | Chi Mei | High-cis BR, colorless, odorless, good abrasion resistance, good rebound ability and strength. | PR-040 | |
HBR | Chi Mei | High-cis BR, colorless, odorless, low water content, transparent | PR-040G | |
HBR | Chi Mei | High-cis BR, colorless, odorless, good abrasion resistance, good rebound ability and strength | PR-040S | |
HBR | Chi Mei | High-cis BR, colorless, odorless, good abrasion resistance, good rebound ability and strength. | PR-050 | |
HBR | Chi Mei | High-cis BR, colorless, odorless, good abrasion resistance, good rebound ability and strength. | PR-060 | |
LBR | Chi Mei | The Low-cis BR has high purity/is odorless/and has good luster in appearance.
It can be used for HIPS modification to obtain high drop impact strength (FDI) and low gel content. | PR-245 | |
LBR | Chi Mei | Low-cis BR, low mooney, high purity, odorless, good luster
in appearance (high-gloss finish),HIPS impact resistance modifier. | PR-255 | |
SSBR | Chi Mei | Balance physical properties and fabricability, good transparency, dimensional stability, smooth. | PR-303 | |
SSBR | Chi Mei | Balance physical properties and fabricability, good transparency, dimensional stability, smooth. | PR-1205 | |
TPE | Chi Mei | Oil-extended copolymerization, high flowability, excellent elastic restoring force, medium hardness | PB-575 | |
TPE | Chi Mei | Oil-extended copolymerization, high flowability, excellent elastic restoring force, low hardness | PB-585 | |
TPE | Chi Mei | Oil-extended copolymerization, high flowability, excellent elastic restoring force, transparent, high hardness | PB-587 | |
TPE | Chi Mei | Non-oil extended copolymerization, general grade, star-shaped structure | PB-511 | |
TPE | Chi Mei | Non-oil extended copolymerization, linear structure, higher molecular weight | PB-5301 | |
TPE | Chi Mei | Non-oil extended copolymerization, linear structure, transparent | PB-5302 | |
TPE | Chi Mei | Non-oil extended copolymerization, high di-block structure | PB-5502 | |
Q-Resin | Chi Mei | High tortuosity resistance, high trans-parency, gloss, and impact strength, general injection grade. | PB-5903 | |
MABS | Denka | Transparent | CL | |
MBS | Denka | Transparent | TH 21 | |
Acrylic | Nantong Rayon Chemical | High Flow | MF 001 | |
Acrylic | Nantong Rayon Chemical | Standard Grade with
High Resistance | VH 001 | |
ABS | Nippon A & L Inc | Impact Resistance | GA 501 | |
MABS | Nippon A & L Inc | Transparent | ST 100 | |
POM | Polyplastics | General Purpose | M90-44 | |
POM | Polyplastics | Food Grade | M90-57 | |
POM | Polyplastics | Standard
High Viscosity | M25-44 | |
POM | Polyplastics | Standard
High Flow | M270-44 | |
POM | Polyplastics | Anti-static | EB10 | |
PC | Panlite | General Purpose
Medium Viscosity | PC L-1250Y | |
PC | Panlite | General Purpose
Low Viscosity | PC L-1225Y | |
PC | Panlite | Good Mold Release; Ultra Low Viscosity | PC L-1225L | |
PC | Panlite | Flame Retardant
Low Viscosity | PC LN-2250Y | |
PC | Panlite | Flame Retardant
Medium Viscosity | PC LN-1250G | |
ABS | Toray | Medium Impact | T700 | |
ABS | Toray | High Impact | T100 | |
MABS | Toray | Transparent
High Rigidity | 920 | |
MABS | Toray | Transparent
Medium Impact | 900 | |
Sustainable Materials | Chi Mei | Contains 70% PCR materials. High-gloss, ultra-high rigidity, tensile strength. | PA-757 M70 | |
Sustainable Materials | Chi Mei | Contains 60% PCR materials. High heat resistance, halogen-free flame retardant, 1.5mm V-0, 2.0 mm 5VB.
| PC-540 M60 | |
Sustainable Materials | Chi Mei | Contains 60% PCR materials. Non-brominated and non-chlorinated flame retardant, 1.0mm V0.
| PC-6600 M60 | |